Ballast weights are necessary to additionally load the tractor axles and to ensure manoeuvrability and
stability of the tractor.
*Rear wheel weights
Bottom weights
*Front weights
Combination of
weights (pcs)
Mass of weights
(kg)
2+6 2x25 + 6x30 230
2+10 2x25 + 10x30 350
2+14 2x25 + 14x30 470
F222
They are installed in case the tractor is not equipped with
the front PTO into the frame tub casting cavity with screws
that are accessible after removal of the battery holder.
Combination of
weights (pcs)
Mass of weights
(kg)
2 2x34 68
F223
The front weights of the can type are suspended in the
tool carrier. They are protected from lateral movement
with a pin inserted between the central weights. The other
weights are attached to the central ones with two clamps.
Note: After the insertion of the pin the front weights and
the weight carrier can be used as the front hook for
emergency towing of a sunken tractor.
Front weights
Combination of
weights (pcs)
Mass of weights
(kg)
3+3 6x50 300
5+5 10x50 500
7+7 14x50 700
9+9 18x50 900
F_02_26
To Next Page
Loading...
Need help?
General
