EasyManuals Logo

Zetor CRYSTAL Series User Manual

Zetor CRYSTAL Series
182 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #42 background imageLoading...
Page #42 background image
Front wiper speed switc
h
Rear window wiper
Windshield washer tank
Washer nozzle
The front wiper speed switch is turned on using the switch
located on the right column of the cabin.
Setting the wiper cycle period:
Turn on the speed switch, after the front window has been
wiped, turn off the speed switch, wait the required period
between wipes and turn on the speed switch.
The required gap between wipes is automatically set.
C15N049
The switch of the rear wiper is located on the right column
of the cabin.
The single-speed engine of the rear wiper is controlled by
the single-position switch of the rear wiper.
C15N050
Windshield washer tank is placed on the rear wall of the
cabin from the outside side.
The washer tank capacity is 2,5 litres.
In summer the reservoir should be filled with distilled wate
r
or mixture for washers.
Antifreeze mixture for washers must be used in winter
season for filling the washer tank.
F_02_152a
The washer nozzle is situated in the upper part of the
hood and is adjustable by needle or steel wire of
maximum diameter 0,8 mm.
C128
ACQUAINTANCE WITH THE TRACTOR
41

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zetor CRYSTAL Series and is the answer not in the manual?

Zetor CRYSTAL Series Specifications

General IconGeneral
TransmissionMechanical or PowerShift
AspirationTurbocharged
Hydraulic SystemLoad Sensing (LS)
Cylinders6
Hydraulic System TypeLoad Sensing (LS)
PTO Speed540/1000 rpm
Weight Approx3, 800-5, 500 kg

Related product manuals