Zetor CRYSTAL Series User Manual

Tyres and wheels
Short functional test
Check the air pressure in the front and rear tyres.
Depending on the character of work adjust the pressure to
the recommended value. Check and if necessary retighten
the bolts of the front and rear wheels.
Never drive with loose wheel bolts!
C15N013
When the engine is started, check whether the signal lamp
of the hydrostatic control failure and of the charging signal
lamp went out, and if the signal lamp of the engine
lubrication and signal lamps indicating error messages are
off.
Verify the function and tightness of hydraulic control
circuits.
C15N014
PREVENTIVE DAILY MAINTENANCE
24

Zetor CRYSTAL Series Specifications

General

Transmission	Mechanical or PowerShift
Aspiration	Turbocharged
Hydraulic System	Load Sensing (LS)
Cylinders	6
Hydraulic System Type	Load Sensing (LS)
PTO Speed	540/1000 rpm
Weight Approx	3, 800-5, 500 kg