ZOLL X Series User Manual

Supervisor Communications Menu
9650-001355-01 Rev. M X Series Operator’s Guide 22-21
Filenames can only be 24 characters long. If the files on the USB device are more than 24
characters, then they will not appear on the X Series unit screen.
Note: The X Series unit only supports PFX format client certificates.
To load a file, use the arrow keys to select the desired file. Only one file can be selected at a
time.
Select Load Selected. If a new USB device has been inserted, select Refresh List.
Note: No message will appear to indicate that the file has loaded. After pressing Load
Selected, press the back arrow ( ) to view the list of all currently loaded certificates
and keys.
Press to return to the Enterprise Wi-fi Configuration menu, and again to return to the
Add Access Point Profile menu.
When finished editing your WiFi profile, press the back arrow ( ) to return to return to the list
of configured access point profiles. From this menu you can also edit or delete existing profiles.
After deleting a file, be sure to review the defined Wi-Fi profiles and update any which referred
to the deleted file.
Press to return to the Communications menu.

ZOLL X Series Specifications

General

Type	Defibrillator/Monitor
Display	Color LCD
ECG Monitoring	Yes
Pacing	Yes
SpO2 Monitoring	Yes
NIBP Monitoring	Yes
Defibrillator Type	Biphasic
EtCO2 Monitoring	Optional
Data Storage	Yes
Battery	Rechargeable Lithium-ion
CPR Feedback	Real CPR Help
Energy Selection	1-360 J
Pacing Rate	30 – 180 ppm
Pacing Output	0 – 140 mA
Display Size	6.5 inches
Invasive Pressure Monitoring	Optional
Temperature Monitoring	Optional
Wireless Connectivity	Wi-Fi, Bluetooth