Zte ZXR10 2900 Series - Page 122

ZXR102900SeriesUserManual
CommandFunction
zte(cfg)#setzesrdomain<domai
nId>{add|delete}{primary-port|
primary-trunk|secondary-port|
secondary-trunk}<portId|trunkId>
Thisaddsordeletes
theprimaryand
secondaryports.
5.Toadd/deleteandconguretheedgeport,usethefollowing
command.
CommandFunction
zte(cfg)#setzesrdomain<domainId>
level<levelId>seg<segId>{add|dele
te}{edge-port|edge-trunk}<portId|
trunkId>[notmaster|master]
Thisadds/deletesand
congurestheedge
port.
Theparameter[notmaster|master]isusedforthecombina-
tionofmasternodesbelongingtothevariouslayers.Theport
attributeisthattheedgeportcansendhealthframeasmas-
ternodeinxedtimetochecktherelatedpacketandswitch
thelinkstate.Thisattributecanonlybesetinthenodewith
attributeEDGE_MASTER.
6.Toadd/deletecontrolVLANinZESRdomain,usethefollowing
command.
CommandFunction
zte(cfg)#setzesrdomain<domainId
>{add|delete}control-vlan<vlanId>
Thisadds/deletes
VLANinZESRdomain.
7.Toadd/deletetheMSTPinstancethattheserviceVLANbe-
longs,usethefollowingcommand.
CommandFunction
zte(cfg)#setzesrdomain<domainI
d>{add|delete}protect-instance
<instanceId>
Thisadds/deletes
theMSTPinstance
thattheserviceVLAN
belongs.
8.Toconguretheintervalforsendinghellopacketandtimeout
interval,usethefollowingcommand.
CommandFunction
zte(cfg)#setzesrdomain<domainId>
hello-timer<1-3>fail-timer<3-9>
Thisconguresthe
intervalforsending
hellopacketand
timeoutinterval.
Theparameterhello-timer:Thesendingtimeinterval.The
unitissecondanditis1sbydefault.
Theparameterfail-timer:Thetimeout.Theunitissecond
anditis3sbydefault.
110CondentialandProprietaryInformationofZTECORPORATION