Zte ZXR10 2900 Series - Syslog Configuration Example; NTP Configuration; Basic Configuration of NTP; NTP Overview

Chapter7ServiceConguration
CommandFunction
zte(cfg)#setsysloglevel{emergencies
|alerts|critical|errors|warnings
|notifications|informational|
debugging}
Thisdenessyslog
informationlevel.
Thedefaultlevelof
sysloginformationis
informational.
zte(cfg)#setsyslogaddserver<id,1-5>
ipaddress<A.B.C.D>[name<string>]
Thissetssyslogserver .
Theservernamecan
notbemorethan20
characters.
zte(cfg)#setsyslogdeleteserver<id>Thisdeletessyslog
serveraccordingtoid.
zte(cfg)#showsyslogstatusThisdisplays
congurationofsyslog.
SyslogConfigurationExample
Supposethatsyslogfunctionofswitchisenabled,information
levelisinformational,allfunctionmodulesareenabled,serverIP
addressis192.168.1.1,nameisSrv1.
Congurationofswitch:
zte(cfg)#setsysloglevelinformational
zte(cfg)#setsyslogaddserver1ipaddress192.168.1.1nameSrv1
zte(cfg)#setsyslogmoduleallenable
zte(cfg)#setsyslogenable
zte(cfg)#showsyslogstatus
Syslogstatus:enable
Syslogalarmlevel:informational
Syslogenabledmodules:
radiusalarmAAAcommandlog
SyslogserverIPName
1192.168.1.1Srv1
NTPConfiguration
NTPOverview
NTPistheprotocolusedtosynchronizetheclocksbetween
networkdevices.ZXR102920/2928/2952/2936-FIprovidesNTP
clientfunctionandsynchronizestheclockwithotherNTPservers.
BasicConfigurationofNTP
TocongureNTP ,performthefollowingsteps.
CondentialandProprietaryInformationofZTECORPORATION183