Zte ZXR10 2900 Series - Remote-Access Configuration Example

ZXR102900SeriesUserManual
CommandFunction
zte(cfg)#setremote-access{any|spec
ific}
Thisdisables/enables
therestrictiveaccess.
Theparameterany
representsanyIP
addresscanaccess
switch.Theparameter
specicrepresents
onlythepermittedIP
addresscanaccess
switch.
zte(cfg)#setremote-accessipaddress
<A.B.C.D>[<A.B.C.D>]{snmp|telnet|ssh
|web}{permit|deny}
Thispermits/denies
theloginmodeofIP
address.
zte(cfg)#setremote-accessipaddress<A
.B.C.D><netmask>[snmp|telnet|ssh|
web]{permit|deny}
ThiscongurestheIP
address,subnetmask
andloginmodeofthe
switchwhichcanbe
login.
[snmp|telnet|ssh|
web]{permit|deny}
isusedtocongure
theaddress-based
hierarchical
authorization,which
restrictstheloginmode
ofremoteloginin
detail.Bydefault,
allloginmodesare
permitted.
zte(cfg)#clearremote-accessallThisdeletesallIP
addressesofrestrictive
access.
zte(cfg)#clearremote-accessipaddress
<A.B.C.D>[<A.B.C.D>]
ThisdeletesanIP
addressofrestrictive
access.
zte(cfg)#showremote-accessThisdisplaysthe
remote-access
conguration
information.
Remote-AccessConfiguration
Example
Example1:Onlyallowthenetworkmanagementusertoaccess
theswitchfrom10.40.92.0/24throughT elnetSSHSNMPWeb.
zte(cfg)#setremote-accessspecific
zte(cfg)#setremote-accessipaddress10.40.92.0255.255.255.0
zte(cfg)#showremote-access
Whethercheckremotemanageaddress:YES
Allowableremotemanageaddress(es)andapplication(s):
10.40.92.0/255.255.255.0snmp,telnet,ssh,web
194CondentialandProprietaryInformationofZTECORPORATION