Zte ZXR10 2900 Series - RMON Configuration Example

Chapter8NetworkManagement
CommandFunction
zte(cfg-snmp)#setrmon{enable|disable}Thisenablesordisables
RMONfunction.
zte(cfg-snmp)#setalarm<1-65535>{int
erval<1-65535>|variable<mib-oid>|
sampletype{absolute|delta}|startup
{rising|falling|both}|threshold
<1-65535>eventindex<1-65535>{rising
|falling}|owner<name>|status{valid
|underCreation|createRequest|
invalid}}
Thissetsalarmgroup.
zte(cfg-snmp)#setevent<1-65535>{d
escription<string>|type{none|log
|snmptrap|logandtrap}|owner
<name>|community<name>|status
{valid|underCreation|createRequest
|invalid}}
Thissetseventgroup.
zte(cfg-snmp)#sethistory<1-65535>{dat
asource<portname>|bucketRequested
<1-65535>|owner<name>|interval
<1-3600>|status{valid|underCreation
|createRequest|invalid}}
Thissetshistorygroup.
zte(cfg-snmp)#setstatistics<1-6553
5>{datasource<portname>|owner
<name>|status{valid|underCreation|
createRequest|invalid}}
Thissetsstatistics
group.
zte(cfg-snmp)#showalarm[<1-65535>]Thisdisplays
conguration
informationabout
alarmgroup.
zte(cfg-snmp)#showevent[<1-65535>]Thisdisplays
conguration
informationabout
eventgroup.
zte(cfg-snmp)#showhistory[<1-65535>]Thisdisplays
conguration
informationabout
historygroup.
zte(cfg-snmp)#showrmonThisdisplaysRMON
status.
zte(cfg-snmp)#showstatistics
[<1-65535>]
Thisdisplays
conguration
informationabout
statisticgroup.
RMONConfigurationExample
Thefollowingexamplesdescribehowtosetevent2,history2,
alarm2andstatistics1respectively.
zte(cfg-snmp)#setevent2descriptionIt'sJustForTest!!
zte(cfg-snmp)#setevent2typelogandtrap
CondentialandProprietaryInformationofZTECORPORATION203