Zte ZXR10 2900 Series - Configuring ZTP

ZXR102900SeriesUserManual
CommandFunction
zte(cfg)#showzdpThisdisplaystheZDP
conguration.
zte(cfg)#showzdpneighbour[detail]Thisdisplaysthe
neighbordevice
informationtable.
ConfiguringZTP
Thetopologyprotocol(ZTP)isaprotocolusedtocollectnetwork
topologyinformation.Withtheneighbordeviceinformationtable
collectedthroughZDP ,ZTPsendsandforwardsZTPtopologycol-
lectionpacketsthroughtherelevantportinthespeciedVLANto
collectthetopologyinformationinthenetwork(hopcount)within
aspecicrangeandtocreateatopologyinformationtablewhich
isusedforknowingnetworktopologystatusandmanagingthe
cluster .
TheZTPcongurationontheswitchincludesthefollowingcon-
tents:
CommandFunction
zte(cfg)#configgroup
Thisenterscluster
management
congurationmode.
zte(cfg-group)#setztp{enable|disable}Thisenables/disables
thesystemZTP
function.
zte(cfg-group)#setztpport<portlist>{e
nable|disable}
Thisenables/disables
theportZTPfunction.
zte(cfg-group)#setztptrunk
<trunklist>{enable|disable}
Thisenables/disables
thetrunkZTPfunction.
zte(cfg-group)#ztpstart
Thisstartscollecting
topologyinformation.
zte(cfg-group)#setztpvlan<1-4094>
ThisconguresaVLAN
forcollectingtopology
information.
zte(cfg-group)#setztphop<1-128>Thissetstherange(hop
count)ofcollecting
topologyinformation.
zte(cfg-group)#setztptimer<0-60>Thissetstimeinterval
forcollectingtopology
informationperiodically.
208CondentialandProprietaryInformationofZTECORPORATION