Zte ZXR10 2900 Series - Basic Configuration of ZESR

Chapter7ServiceConguration
BasicConfigurationofZESR
1.TosetthenodeattributeinZESRdomainmajorlevel,usethe
followingcommand.
FunctionCommand
zte(cfg)#setzesrdomain<domainId>
major-levelmode{master|transit|
edge-master|edge-transit}
Thissetsthenode
attributeinZESR
domainmainlevel.
Theparameterdomain<domainId>:ZESRDomainID,the
rangeis1-4.
Theparametermode:nodemode.
Theparameter{master|transit|edge-master|edge-tr
ansit}:Theyarethemasternode,transitionnode,segment
link(edge)masternodeandsegmentlink(edge)transition
noderespectively.
Foredgenode,level-idandseg-idrepresenthigh-levelring.
2.TosetthenodeattributeinZESRdomainsubring,usethe
followingcommand.
CommandFunction
zte(cfg)#setzesrdomain<domainId>
level<levelId>segment<segId>mode
{master|transit|edge-master|
edge-transit}
Thissetsthenode
attributeinZESR
domainsubring.
Theparameterdomain<domainId>:ZESRDomainIDthe
rangeis1-4.
Theparameterlevel<levelId>:levelID,therangeis1-2.
Theparametersegment<segId>:SegmentlinkID,therange
is1to4.
Theparametermode:Thenodemode.
Theparameter{master|transit|edge-master|edge-tr
ansit}:Theyarethemasternode,transitionnode,segment
link(edge)masternodeandsegmentlink(edge)transition
noderespectively.
Foredgenode,level-idandseg-idrepresenthigh-levelring.
3.TodeleteZESRdomain,usethefollowingcommand.
CommandFunction
zte(cfg)#clearzesrdomain<domainId>ThisdeletesZESR
domain.
4.Toaddordeletetheprimaryandthesecondaryports,usethe
followingcommand.
CondentialandProprietaryInformationofZTECORPORATION109