Zte ZXR10 2900 Series - Upgrading PON Daughter Card

Chapter7ServiceConguration
zte(cfg)#showvlan-translation
ingressport:3egressport:19state:enable
ingressvlanlist:1000
egressvlanlist:200/*VLANtranslationruleisvalid.*/
zte(cfg)#showigmpsnooping
IGMPsnooping:enabledRouterTimeout:2600
FastLeave:enabledHostTimeout:2600
QueryInterval:1250
CrossVlansnooping:disabled
ResponseQueryInterval:100
LastMemberQueryInterval:10
SnoopingVlanId:1000/*multicastconfigurationisvalid,snoopVLAN1000*/
QueryingVlanId:none
IGMPv3Snooping:disabled
ProxyVersion:auto
QueryVersion:v2
PrivateGroup:disable
PrivateGroupIp:none
Multicastforwardingallports!
UpgradingPONDaughterCard
ShortDescription
ThisfollowingcontentdescribeshowtoupgradePONdaughter
cardonZXR102920/2928.
Prerequisite
Themainsystemversionlekernel.zhasbeenupdatedonZXR10
2920/2928.Fordetailedupdatingsteps,refertoSoftwareVersion
Upgrade.
Caution:
PONdaughtercardversionleonlyappliestoZXR102920/2928.
Steps
1.Enterintolesystemcongurationmode,deletetheoldver-
sionlefromFLASHwithremovecommand.ThetwoPON
daughtercardversionleshavelongerlename,theirleex-
tensionnameareblobanddatrespectively,suchas:
�iros_onu_oob_asic_rom_big-02.00.04-1216201110.blob
PONdaughtercardversionle
�eeprom-onu-3d.up.noreset.ctrlvlan0.igmp0.datPON
daughtercardcongurationle
2.DownloadtheaboveversionlesfromTFTPservertoFLASH
withtftpcommand.
3.Upgradebloblewithupdateimagecommand.
Thecommandformat:
zte(cfg-tffs)#updateimage*.blob
“*”representsthelename
4.UpgradedatlewithupdateEponconfigcommand.
zte(cfg-tffs)#updateEponconfig*.dat
“*”representsthelename
CondentialandProprietaryInformationofZTECORPORATION145