Zte ZXR10 2900 Series - DHCP Snooping;Option82 Configuration

Chapter7ServiceConguration
CommandFunction
zte(cfg)#setigmpsnooping
query-interval<10-2147483647>
Thissetsthesnooping
interval.thedefault
valueis1250,
whichrepresents
125seconds.10
represents1second,
20represents2
seconds….2147483647
represents
214748364.7seconds.
zte(cfg)#setigmpsnooping
response-interval<10-250>
Thissetsthesnooping
responseinterval.The
defaultvalueis100,
whichrepresents10
seconds.10represents
1second,20represents
2seconds….250
represents25seconds.
zte(cfg)#setigmpsnooping
last-member-query<10-250>
Thissetsthesnooping
intervaloflastmember .
Thedefaultvalueis
10.10represents1
second,20represents
2seconds….250
represents25seconds.
zte(cfg)#setigmpsnoopingfastleave
{enable|disable}
Thisenablesordisables
theIGMPfastleave
function.Thedefaultis
disable.
zte(cfg)#setigmpsnoopingcrossvlan
{enable|disable}
Thisenablesordisables
cross-vlansnooping
function.Thedefaultis
disable.
zte(cfg)#setigmpfilter{enable|disable}
Thisenablesordisables
theIGMPlter .The
defaultisdisable.
zte(cfg)#setigmpfilteraddgroupip
<A.B.C.D>vlan<vlanlist>
Thisaddsmulticast
ltergroupaddressinto
thespeciedmulticast
monitorVLAN.
Theparametergroupip
<A.B.C.D>:IPaddress,
therangeisfrom
224.x.x.xto239.x.x.x
except224.0.0.x.
zte(cfg)#setigmpfilterdeletegroupip
<A.B.C.D>vlan<vlanlist>
Thisdeletesmulticast
ltergroupaddress
fromthespecied
multicastmonitor
VLAN.
CondentialandProprietaryInformationofZTECORPORATION121