Zte ZXR10 2900 Series - Page 140

ZXR102900SeriesUserManual
CommandFunction
zte(cfg-nas)#iptvcdrdeny-right{enable
|disable}
Thisenablesordisables
cdrrecordfunction
whentheaccess
authorizationisdeny.
Thedefaultisdisable.
zte(cfg-nas)#iptvcdrprv-right{enable|
disable}
Thisenablesor
disablescdrrecord
functionwhenthe
accessauthorizationis
preview.Thedefaultis
disable.
zte(cfg-nas)#iptvcdrwarning-threshold
<thresholdvalue>
Thissetsthe
warning-threshold
ofCDRcachepool.The
defaultvalueis50%.
zte(cfg-nas)#showiptvcdrThisdisplaysthe
conguredCDR
attribute.
zte(cfg-nas)#iptvport<portlist>[vlan
<vlan-id>]service{start|pause|
resume|remove}
Thissetsthecurrent
servicestateofuser .
zte(cfg-nas)#iptvport<portlist>[vlan
<vlan-id>]control-mode{package|
channel}
Thissetsmulticast
control-modeofuser .
zte(cfg-nas)#iptvport<portlist>[vlan
<vlan-id>]package{name<package-nam
e>|id<package-id>}
Thisdistributespackage
tousers.
zte(cfg-nas)#cleariptvport<portlist>[
vlan<vlan-id>]package{name
<package-name>|id<package-id>}
Thisdeletesthe
distributedpackage.
zte(cfg-nas)#iptvport<portlist>[vlan
<vlan-id>]channel{name<channel-nam
e>|id-list<channel-idlist>}{deny|order
|preview|query}
Thiscongureschannel
accessauthorizationof
userport.
zte(cfg-nas)#iptvport<portlist>[vlan<vla
n-id>]cdr{enable|disable}
Thiscongureswhether
theuseropensCDR
recordfunction.The
defaultsettingis
enabled.
zte(cfg-nas)#iptvport<portlist>[vlan
<vlan-id>]mac-base{enable|disable}
Thiscongures
whethertheuser
opensthemac-based
management.The
defaultisdisabled.
zte(cfg-nas)#showiptvrule[port
<portid>[vlan<1-4094>[channel|
package]|channel|package]]
Thisdisplaysthe
informationofiptv
rule.
128CondentialandProprietaryInformationofZTECORPORATION