Zte ZXR10 2900E Series - Set Port Protect Time; Set Cable-Diag

Chapter4ServiceConguration
Default
Theportprotectionfunctionisdisabled.
Example
Thefollowingexampleenablestheportprotectionfunctionforports1,5,6,7,and11:
zte(cfg)#setport1,5-7,11protectenable
4.2.25setportprotecttime
Purpose
Thiscommandsetstheportprotectionperiod.
CommandMode
Allcongurationmodes
Syntax
setport<portlist>protecttime<1-10>
ParameterDescription
ParameterDescription
[<portlist>]Portlist
<1-10>Portprotectionperiod,inminutes
Default
10minutes.
Example
Thefollowingexamplesetstheportprotectionperiodforports1and5:
zte(cfg)#setport1,5protecttime3
4.2.26setcable-diag
Purpose
Thiscommandsetsthefunctionofvirtualcablesdetectinglogs.
CommandMode
Allcongurationmodes
4-61
SJ-20130731155059-003|2013-11-27(R1.0)ZTEProprietaryandCondential