Zte ZXR10 2900E Series - Set Mac Logging-Alarm; Set Mac Logging-Alarm Interval

Chapter4ServiceConguration
staticaddresses.Whenthetransformationiscompleted,thelaterlearnedMACaddresses
aredynamicMACaddresses.
4.7.22setmaclogging-alarm
Purpose
ThiscommandenablesordisablestheMACeventalarmfunction.
CommandMode
Globalcongurationmode
Syntax
setmaclogging-alarm{station-move|threshold-state}{enable|disable}
ParameterDescription
ParameterDescription
station-moveMACdriftalarmswitch.
threshold-state
ThresholdalarmswitchusedtoremindthatthenumberofMAC
addressesisabouttoreachthethreshold.
enableEnablesthealarmswitch.
disableDisablesthealarmswitch.
Default
Thedriftalarmswitchisdisabled.
Thethresholdalarmswitchisenabled.
Example
ThefollowingexampleenablestheMACeventalarmfunction:
zte(cfg)#setmaclogging-alarmstation-moveenable
4.7.23setmaclogging-alarminterval
Purpose
ThiscommandsetstheintervalforMACeventalarmoutput.
CommandMode
Globalcongurationmode
4-105
SJ-20130731155059-003|2013-11-27(R1.0)ZTEProprietaryandCondential