Zte ZXR10 2900E Series - Set Qos Traffic-Limit Port Packet-Type

Chapter4ServiceConguration
4.14.14setqostraffic-limitportpacket-type
Purpose
Thiscommandsetsthepackettypestowhichtheratelimitfunctionisapplied.
CommandMode
Globalcongurationmode
Syntax
setqostraffic-limitport<1-28>packet-type{broadcast|known-uc|multicast|tcp-syn|unk
nown-uc}{enable|disable}
ParameterDescription
ParameterDescription
<1-28>
NumberofanFEport.Differentdeviceshavedifferentport
numberranges.Inthesyntax,the2928Edeviceisusedasan
example.
broadcast
Specieswhethertoapplytheratelimitfunctiontobroadcast
packets.
known-uc
Specieswhethertoapplytheratelimitfunctiontoknownunicast
packets.
multicast
Specieswhethertoapplytheratelimitfunctiontomulticast
packets.
tcp-syn
Specieswhethertoapplytheratelimitfunctiontopackets
initiatedbyTCPlinks.
unknown-uc
Specieswhethertoapplytheratelimitfunctiontounknown
unicastpackets.
enableEnablestheratelimitfunctionforthespeciedpackettype.
disableDisablestheratelimitfunctionforthespeciedpackettype.
Default
Theratelimitfunctionisenabledforthespeciedpackettype.
Example
Thefollowingexampleenablesratelimitforbroadcastpacketintheingressdirectionfor
port2:
zte(cfg)#setqostraffic-limitport2packet-typebroadcastenable
4-311
SJ-20130731155059-003|2013-11-27(R1.0)ZTEProprietaryandCondential