Zte ZXR10 2900E Series - Set Loginauth

ZXR102900ESeriesCommandReference
Example
Thefollowingexamplecreatesauserwiththenameofuserxandrightsofguest:
zte(cfg)#createuseruserxguest
4.1.19setloginauth
Purpose
Thiscommandsetstheloginauthenticationmode.
CommandMode
Globalcongurationmode
Syntax
setloginauth{local|radius|local+radius|radius+local|tacacs-plus|local+tacacs-plus|tacacs-
plus+local}
ParameterDescription
ParameterDescription
localSetslocalauthenticationfortheloginuser.
radius
SetsRemoteAuthenticationDialInUserService(RADIUS)
authenticationfortheloginuser.
local+radius
Localauthenticationisperformedrst.Iflocalauthenticationfails,
RADIUSauthenticationisperformed.
radius+local
RADIUSauthenticationisperformedrst.IfRADIUS
authenticationfails,localauthenticationisperformed.
tacacs-plusSetsTerminalAccessControllerAccess-ControlSystemPlus
(TACACS+)authenticationfortheloginuser.
local+tacacs-plusLocalauthenticationisperformedrst.Iflocalauthenticationfails,
TACACS+authenticationisperformed.
tacacs-plus+localTACACS+authenticationisperformedrst.IfTACACS+
authenticationfails,localauthenticationisperformed.
Default
Localauthentication
4-10
SJ-20130731155059-003|2013-11-27(R1.0)ZTEProprietaryandCondential