Zte ZXR10 2900E Series - Sflow; Set Sflow Agent-Address

ZXR102900ESeriesCommandReference
ParameterDescription
member<1-253>
Thecommanderlogsintoamember.<1-253>istheIDofthe
member.
Example
Thefollowingexamplemakesamemberswitchlogintothecommander:
Mem1.zte(cfg)#rlogincommander
Trying...Open
Connecting...
Cmdr.zte>
Thefollowingexamplemakescommanderlogintomember1:
Cmdr.zte(cfg)#rloginmember1
Trying...Open
Connecting...
Mem1.zte>
5.7SFlow
5.7.1setsflowagent-address
Purpose
ThiscommandsetstheSFLOWagent.
CommandMode
Globalcongurationmode
Syntax
setsflowagent-address<A.B.C.D>[udp-port<1-65535>]
ParameterDescription
ParameterDescription
<A.B.C.D>IIPaddressoftheSFLOWagent.
<1-65535>
NumberoftheUDPportusedtosendSFLOWsampling
messages.
Guidelines
InSFLOWapplication,theswitchplaystheSFLOWagentroleandingeneral,theagent
addressisconguredastheIPaddressoftheswitch.
5-60
SJ-20130731155059-003|2013-11-27(R1.0)ZTEProprietaryandCondential