Zte ZXR10 2900E Series - Debug Protocol Layer3 Ip Enable;Disable; Debug Protocol Layer3 Ip Port

Chapter4ServiceConguration
Parameters
ParameterDescription
enableEnablesthedebugfunctionofthedot1xmodule.
disableDisablesthedebugfunctionofthedot1xmodule.
Defaults
Bydefault,thedebugfunctionofthedot1xmoduleisdisabled.
4.47.11debugprotocollayer3ipenable/disable
Function
Thiscommandenablesordisablesthedebugfunctionoflayer3IPmessages.
Mode
Globalconguration
Syntax
debugprotocollayer3ip{enable|disable}
Parameters
ParameterDescription
enableEnablesthedebugfunctionoflayer3IPmessages.
disableDisablesthedebugfunctionoflayer3IPmessages.
Defaults
Bydefault,thedebugfunctionoflayer3IPmessagesisdisabled.
UsageGuidelines
Themessageinformationtobeobservedincludesthelink-mtuparameteroftheIPport,
MACaddressforreceivingmessages,andsizeofthemessages.
4.47.12debugprotocollayer3ipport
Function
Thiscommandshowsstatisticaldataofallipports.
Mode
Globalconguration
4-617
SJ-20130731155059-003|2013-11-27(R1.0)ZTEProprietaryandCondential