Zte ZXR10 2900E Series - Set Protocol-Protect Priority

Chapter4ServiceConguration
ParameterDescription
ParameterDescription
{group-name}
Groupnames,includingIEEE-reserved1,IEEE-reserved2,ZESR,
loopdetect,arp-reply,802.1x,IGMP ,DHCP ,VBAS,PPPoE+,
arp-request,sFlow,UDLD,IPv4,CFM,androute.
<0-800>Protocolratelimitvalue.
Example
ThefollowingexamplesetstheratelimitoftheZESRprotocolpersecondto100:
zte(cfg)#setprotocol-protectlimitzesr100
4.33.5setprotocol-protectpriority
Purpose
ThiscommandsetsthePPpriority.
CommandMode
Globalcongurationmode
Syntax
setprotocol-protectpriority{protocol-name|all}{<0-7>|default}
ParameterDescription
ParameterDescription
{protocol-name}
Protocolnames,including802.1x,arp-reply,arp-request,DHCP ,
DHCPv6,EOAM,GM,GVRP ,IGMP ,IP ,IPv6,LACP ,LLDP ,
loopdetect,MLD,PPPoE+,STP ,UDLD,VBAS,andZESR.
allAllsupportedprotocols.
<0-7>Priorityvalue.
defaultRestoresthedefaultcongurationofthepacketpriority.
Example
ThefollowingexamplesetsthepacketpriorityoftheZESRprotocolto5:
zte(cfg)#setprotocol-protectpriorityzesr5
4-507
SJ-20130731155059-003|2013-11-27(R1.0)ZTEProprietaryandCondential