Zte ZXR10 2900E Series - Set Stp Trunk Enable;Disable

ZXR102900ESeriesCommandReference
ParameterDescription
ParameterDescription
<10-65535>Interval.Theunitsisseconds.
Guidelines
Afterportrecovery,implementtheBPDUprotectionfunctionimmediately.IfaBPDU
messageisreceived,theportsaredisconnected.
Default
Theintervalis100seconds.
Example
ThefollowingexamplesetstheintervalforBPDUprotectionrecoveryto1000:
zte(cfg)#setstpbpdu-interval1000
4.12.9setstptrunkenable/disable
Purpose
ThiscommandenablesordisablestheSTPfortrunks.
CommandMode
Globalcongurationmode
Syntax
setstptrunk<trunklist>{enable|disable}
ParameterDescription
ParameterDescription
<trunklist>Trunklist.
enableEnablestheSTP .
disableDisablestheSTP .
Default
TheSTPisenabled.
4-198
SJ-20130731155059-003|2013-11-27(R1.0)ZTEProprietaryandCondential