Zte ZXR10 2900E Series - Set Recvpacket; Set Src-Ipport

ZXR102900ESeriesCommandReference
5.4.2setrecvpacket
Purpose
ThiscommandsetsthenumberofSNMPmessagesthattheSNMPprotocolstackcan
processinasecond.
CommandMode
SNMPcongurationmode
Syntax
setrecvpacket<0-100>
ParameterDescription
ParameterDescription
<0-100>
NumberofSNMPmessagesthattheSNMPprotocolstackcan
processinasecond.
Default
ThenumberofSNMPmessagesthattheSNMPprotocolstackcanprocessinasecond
is40.
Example
ThefollowingexamplesetsthenumberofSNMPmessagesthattheSNMPprotocolstack
canprocessinasecondto80:
zte(cfg-snmp)#setrecvpacket80
5.4.3setsrc-ipport
Purpose
ThiscommandsetstheSNMPsourceIPaddress.
CommandMode
SNMPcongurationmode
Syntax
setsrc-ipport<0-63>
5-10
SJ-20130731155059-003|2013-11-27(R1.0)ZTEProprietaryandCondential