Zte ZXR10 2900E Series - Set Ntp Src-Udp-Port; Show Ntp

Chapter4ServiceConguration
4.23.11setntpsrc-udp-port
Purpose
ThiscommandsetstheIDofthesourceUDPportofNTPpackets.
CommandMode
Globalcongurationmode
Syntax
setntpsrc-udp-port{123|1000}
ParameterDescription
ParameterDescription
123TheIDofthesourceUDPportofthesentNTPpacketsis123.
1000TheIDofthesourceUDPportofthesentNTPpacketsis1000.
Default
TheIDofthesourceUDPportis1000.
4.23.12showntp
Purpose
ThiscommandshowstheNTPconguration.
CommandMode
Allcongurationmodes
Syntax
showntp
Example
ThefollowingexampleshowstheNTPconguration:
zte(cfg)#showntp
ntpprotocolisenabled
ntpserveraddress:10.40.89.78
ntpsourceaddress:None
ntpsecondserverprotocolversion：2
ntpsecondserveraddress:192.168.1.1
ntpsecondserverkey:100
4-423
SJ-20130731155059-003|2013-11-27(R1.0)ZTEProprietaryandCondential