Zte ZXR10 2900E Series - Set Ntp Source; Set Ntp Clock-Period

Chapter4ServiceConguration
4.23.7setntpsource
Purpose
ThiscommandsetsthesourceIPaddressusedwhentheswitchtransmitsNTPdata
packets.
CommandMode
Globalcongurationmode
Syntax
setntpsource<A.B.C.D>
ParameterDescription
ParameterDescription
<A.B.C.D>Layer–3portaddress
Guidelines
IftheenteredIPaddressis0.0.0.0,thesourceIPaddressisrestoredtothedefaultsetting,
whichmeansitisnull.
4.23.8setntpclock-period
Purpose
ThiscommandsetstheNTPtimesynchronizationperiod.
CommandMode
Globalcongurationmode
Syntax
setntpclock-period<5-2147483647>
Parameter
ParameterDescription
<5-2147483647>Timesynchronizationperiod(seconds)
Default
10seconds.
4-421
SJ-20130731155059-003|2013-11-27(R1.0)ZTEProprietaryandCondential