Zte ZXR10 2900E Series - Set Dhcpv6 Port Server;Cascade;Client

ZXR102900ESeriesCommandReference
Default
TheDHCPv6snoopingfunctionisdisabled.
Examples
ThefollowingexampleenablestheDHCPv6Snoopingfunctiononport10:
zte(cfg)#setdhcpv6snoopingaddport1
%DHCPv6snoopingisdisabled(0x40000927)
zte(cfg)#setdhcpv6sn
zte(cfg)#setdhcpv6snoopingen
zte(cfg)#setdhcpv6snoopingaddport1
4.26.3setdhcpv6portserver/cascade/client
ThiscommandsetsthepropertyofaportintheDHCPv6snoopingfunction.
CommandMode
Globalcongurationmode
Syntax
setdhcpv6port<1-28>{server|cascade|client}
ParameterDescription
ParameterDescription
<portlist>Portlist.
server
CongurestheporttoconnecttotheDHCPv6sever.Itisatrusted
port.
cascadeCongurestheporttobecascaded.Itisanuntrustedport.
client
CongurestheporttobedirectlyconnectedtotheDHCPv6client.
Itisanuntrustedport.
UsageGuidelines
DHCPv6Discovermessagesreceivedbyportssettocascadeandclientareforwardedto
portssettoserver.DHCPOffermessagesreceivedbyportssettocascadeandclientare
dropped.DHCPOffermessagesreceivedbyportssettoserverareforwardedtoportsset
tocascadeandclient.
Default
Portsaresettoclient.
4-458
SJ-20130731155059-003|2013-11-27(R1.0)ZTEProprietaryandCondential