Zte ZXR10 2900E Series - Show Ipport

ZXR102900ESeriesCommandReference
Syntax
showarp[static|dynamic|invalid|ipport<0-63>[static|dynamic|invalid]|ipaddress
<A.B.C.D>]
Parameters
ParameterDescription
static
ShowsstaticARPentries.Ingeneral,staticARPentriesare
manuallyaddedorautomaticallygeneratedbylayer–3ports.
dynamic
ShowsdynamicARPentries.Ingeneral,dynamicARPentriesare
dynamicallygenerated.
invalid
ShowsinvalidARPentries.AninvalidARPentryisgeneratedif
theswitchsendsanARPrequestbutdoesnotreceiveanARP
reply.
<0-63>Numberofalayer-3port.
<A.B.C.D>ShowstheARPentriesrelatedtotheIPaddress.
Example
1.ThefollowingexampleshowsallARPentriesandthefreeARPfunction’sstatus:
zte(cfg-router)#showarp
2.ThefollowingexampleshowsinvalidARPentries:
zte(cfg-router)#showarpinvalid
3.ThefollowingexampleshowsstaticARPentriesonlayer-3port1:
zte(cfg-router)#showarpipport1static
4.ThefollowingexampleshowstheARPentrieswiththeIPaddressof192.168.1.167:
zte(cfg-router)#showarpipaddress192.168.1.167
4.17.18showipport
Purpose
Thiscommandshowstheinformationaboutlayer-3ports.
CommandMode
Layer-3congurationmode
Syntax
showipport[<0-63>]
4-366
SJ-20130731155059-003|2013-11-27(R1.0)ZTEProprietaryandCondential