Zte ZXR10 2900E Series - Set Remote-Access Ipaddress Permit;Deny

ZXR102900ESeriesCommandReference
Default
AnyIPaddresscanlogintotheswitch.
Example
ThefollowingexampleenablesallIPaddressestomanagetheswitch:
zte(cfg)#setremote-accessany
5.1.2setremote-accessipaddresspermit/deny
Purpose
ThiscommandsetswhetherthespeciedIPaddressornetworksegmentcanaccessthe
switchthroughSSH/SNMP/T elnet/Web.
CommandMode
Globalcongurationmode
Syntax
setremote-accessipaddress<A.B.C.D>[<A.B.C.D>][{snmp|telnet|ssh|web}{permit|deny}]
Parameters
ParameterDescription
<A.B.C.D>(rst)IPaddress.
<A.B.C.D>(second)Mask.
snmp
CongureswhetherthespeciedIPaddressornetworksegment
canlogintotheswitchthroughSNMP .
telnet
CongureswhetherthespeciedIPaddressornetworksegment
canaccesstheswitchthroughTelnet.
ssh
CongureswhetherthespeciedIPaddressornetworksegment
canaccesstheswitchthroughSSH.
web
CongureswhetherthespeciedIPaddressornetworksegment
canaccesstheswitchthroughWEB.
permitPermitsaccess.
denyDeniesaccess.Themanagementpacketsarediscarded.
Guidelines
Thiscommandwithoutamaskindicatesahostaddressandthe255.255.255.255maskis
usedbydefault.Thecommandwithamaskindicatesanetworksegmentaddress.
5-2
SJ-20130731155059-003|2013-11-27(R1.0)ZTEProprietaryandCondential