Zte ZXR10 2900E Series - Set Protocol-Protect Alarm Enable;Disable

Chapter4ServiceConguration
Syntax
createprotocol-protectmac-droprule<1-128>src-mac<HH.HH.HH.HH.HH.HH>mask<H
H.HH.HH.HH.HH.HH>
ParameterDescription
ParameterDescription
<1-128>Ruleindex.
src-mac<HH.HH.HH.HH.HH.
HH>
SourceMACaddress.
mask<HH.HH.HH.HH.HH.HH>Mask.
Example
ThefollowingexamplecreatesaMACdroprule:
zte(cfg)#createprotocol-protectmac-droprule1src-mac
00.11.22.33.44.55maskff.ff.ff.ff.ff.ff
4.33.2setprotocol-protectalarmenable/disable
Purpose
Thiscommandenablesordisablestheport-basedPPalarmfunction.
CommandMode
Globalcongurationmode
Syntax
setprotocol-protectalarmport<portlist>{enable|disable}
ParameterDescription
ParameterDescription
<portlist>Portlist.
enableEnablesthePPfunction.
disableDisablesthePPfunction.
Default
ThePPfunctionisenabled.
Example
ThefollowingexampledisablesthePPalarmfunctiononport1:
4-505
SJ-20130731155059-003|2013-11-27(R1.0)ZTEProprietaryandCondential