Zte ZXR10 2900E Series - ACL Configuration; Set Port Acl Mode

Chapter4ServiceConguration
ParameterDescription
ParameterDescription
<trunklist>Trunklist
Example
ThefollowingexampleshowstheSTPcongurationoftrunk1:
zte(cfg)#showstptrunk1
Thefollowingtrunk(s)arenotactive!
PortId:T1MSTI:00
Priority:128Cost:Auto
Status:N/ARole:Stp
GuardType:NoneLinkType:P2P
4.13ACLConguration
4.13.1setportaclmode
Purpose
ThiscommandsetstheACLbindingmodeofports.
CommandMode
Globalcongurationmode
Syntax
setport<portlist>aclmode{port|vlan}
ParameterDescription
ParameterDescription
<portlist>Portlist.
portThespeciedportsmatchtheACLboundtotheports.
vlan
ThespeciedportsmatchtheACLboundtotheVLANsthatthe
portsbelongto.
Guidelines
ThedevicesupportsthebindingmodesbasedonportsandVLANs.WhentheVLANmode
iscongured,theVLANACLruleisapplied.
4-213
SJ-20130731155059-003|2013-11-27(R1.0)ZTEProprietaryandCondential