Zte ZXR10 2900E Series - Set Stp Instance Priority

ZXR102900ESeriesCommandReference
ParameterDescription
ParameterDescription
<0-63>InstanceID.
port<1-52>
Portnumber.Differentdeviceshavedifferentportnumberranges.
Inthesyntax,the2952Edeviceisusedasanexample.
trunk<trunklist>Trunklist.
enableEnablestheloop-guardfunction.
disableDisablestheloop-guardfunction.
Guidelines
Theportsenablingtheloop-guardfunctioncannotforwarddata.
Example
Thefollowingexampleenablesloop-guardofport1ininstance1:
zte(cfg)#setstpinstance1port1loop-guardenable
4.12.25setstpinstancepriority
Purpose
Thiscommandsetsthepriorityofbridgeininstance.
CommandMode
Globalcongurationmode
Syntax
setstpinstance<0-63>priority<0-61440>
ParameterDescription
ParameterDescription
<0-63>InstanceID
<0-61440>Priorityofbridge
Guidelines
Theprioritymustbeamultipleof4096.Ifthevalueyouenterisnotamultipleof4096,the
systemwillautomaticallytransformittothevalueclosesttothemultipleof4096.
Example
Thefollowingexamplesetsthepriorityofbridgeininstance1to4096:
4-208
SJ-20130731155059-003|2013-11-27(R1.0)ZTEProprietaryandCondential