Zte ZXR10 2900E Series - Set Mld Snp Host-Time-Out;Mrouter-Time-Out

ZXR102900ESeriesCommandReference
ParameterDescription
addAddsthemrouterport.
deleteDeletesthemrouterport.
<1-28>
Numberofaport.Differentdeviceshavedifferentportnumber
ranges.Inthesyntax,the2928Edeviceisusedasanexample.
Example
Thefollowingexampleaddsport9toVLAN1asanmrouterport:
zte(cfg)#setmldsnvlan1addmrouterport9
4.35.7setmldsnphost-time-out/mrouter-time-out
Purpose
Thiscommandsetsthetimeoutdurationofthemrouter/hostport.
CommandMode
Globalcongurationmode
Syntax
setmldsnooping{host-time-out|mrouter-time-out}<30-65535>
ParameterDescription
ParameterDescription
<30-65535>Agingtime(seconds).
host-time-outConguresthetimeoutdurationofthehostport.
mrouter-time-outConguresthetimeoutdurationofthemrouterport.
Guidelines
Whentheagingtimeisreached,mrouterportsandhostportsaredeletedfromthemulticast
group.
Default
Thedefaultagingtimeis260seconds.
Example
Thefollowingexamplesetstheagingtimeofthemrouterportto400secondsandthe
agingtimeofthehostportto300seconds:
zte(cfg)#setmldsnoopingmrouter-time-out400
4-526
SJ-20130731155059-003|2013-11-27(R1.0)ZTEProprietaryandCondential