Zte ZXR10 2900E Series - Set Dhcp Client Broadcast-Flag Enable;Disable; Show Dhcp Client

ZXR102900ESeriesCommandReference
Syntax
setdhcpclient{enable|disable}
ParameterDescription
ParameterDescription
enable
EnablestheDHCPclientfunction.Layer-3portscanapplyforIP
addressesautomatically.
disableDisablestheDHCPclientfunction.
Default
TheDHCPclientfunctionisdisabled.
4.25.22setdhcpclientbroadcast-flagenable/disable
Purpose
ThiscommandsetswhethertheDHCPservertakesabroadcastprocedurewhenreplying
toapacket.
CommandMode
Globalcongurationmode
Syntax
setdhcpclientbroadcast-flag{enable|disable}
ParameterDescription
ParameterDescription
enable
TheDHCPservertakesabroadcastprocedurewhenreplying
toapacket.
disable
TheDHCPserverdoesnottakeabroadcastprocedurewhen
replyingtoapacket.
Default
TheDHCPserverdoesnottakeabroadcastprocedurewhenreplyingtoapacket.
4.25.23showdhcpclient
Purpose
ThiscommandshowsthecongurationoftheDHCPclient.
4-444
SJ-20130731155059-003|2013-11-27(R1.0)ZTEProprietaryandCondential