Zte ZXR10 2900E Series - Set Ethernet-Oam Remote-Loopback Timeout

ZXR102900ESeriesCommandReference
Guidelines
Thespeciedportssendoampdulinkdiscoverymessagesinaccordancewiththeperiod.
Whenthediscoveryissuccessful,ifoampdumessagesarenotreceivedwithinthetimeout
time,thediscoveryfails.Portsinactivemodecanactivelysendoampdumessages.Aport
inpassivemodecanonlypassivelyreceivemessages.Whenbothendportsofalinkare
inpassivemode,thelinkdiscoverycannotbecreated.
Default
Theactivediscoverymodeiscongured.
Example
Thefollowingexamplesetsthesendingperiodofoampduto100milliseconds,timeout
durationto5seconds,anddiscoverymodetoactive:
zte(cfg)#setethernet-oamport1period1timeout5modeactive
4.30.4setethernet-oamremote-loopbacktimeout
Purpose
Thiscommandsetsthetimeoutdurationofports’remoteloopbackfunction.
CommandMode
Globalcongurationmode
Syntax
setethernet-oamremote-loopbacktimeout<1-10>
ParameterDescription
ParameterDescription
<1-10>Timeoutduration(seconds).
Guidelines
Theremoteloopbacktimeouttimeissuggestedtobeatleast3timeslargerthantheport
oampdusendingperiod.
Default
3seconds.
Example
Thefollowingexamplesetsthetimeouttimeofports’remoteloopbackfunctionto5
seconds:
4-488
SJ-20130731155059-003|2013-11-27(R1.0)ZTEProprietaryandCondential