Zte ZXR10 2900E Series - Set Group Mac-Mode; Set Group Syslogsvr

Chapter5ManagementConguration
5.6.28setgroupmac-mode
Purpose
Thiscommandsetstheprotocolmulticastaddressforclustermanagement.
CommandMode
Clustermanagementcongurationmode
Syntax
setgroupmac-mode{standard|extend[mac<HH.HH.HH.HH.HH.HH>]}
ParameterDescription
ParameterDescription
standardUsesthestandard01.80.c2.00.00.09address.
extend
Usestheextendedaddress.Ifthemacparameterisnotset,the
01.80.c2.00.00.10addressisused.
mac
UsesthespeciedMAAaddress.Thevaluerangeis
01.80.C2.00.00.11-13or01.80.C2.00.00.16-1F.
<HH.HH.HH.HH.HH.HH>MACaddress.
Default
Thedefaultaddressis01.80.c2.00.00.09.
Example
Thefollowingexamplesetstheprotocolmulticastaddressforclustermanagementto
01.80.c2.00.00.13:
Cmdr.zte(cfg-group)#setgroupmac-modeextendmac01.80.c2.00.00.13
5.6.29setgroupsyslogsvr
Purpose
ThiscommandsetstheIPaddressoftheclusterSYSLOGserver.
CommandMode
Clustermanagementcongurationmode
Syntax
setgroupsyslogsvr<A.B.C.D>
5-55
SJ-20130731155059-003|2013-11-27(R1.0)ZTEProprietaryandCondential