Zte ZXR10 2900E Series - Set Vlan Protocol-Mapping Session-No; Create Vlan Name

ZXR102900ESeriesCommandReference
Default
TheprotocolVLANfunctionisdisabled.
Example
ThefollowingexampleenablestheprotocolVLANfunctiononport10:
zte(cfg)#setport10protocol-vlanenable
4.5.7setvlanprotocol-mappingsession-no
Purpose
ThiscommandsetsaprotocolVLANtemplate.
CommandMode
Globalcongurationmode
Syntax
setvlanprotocol-mappingsession-no<1-8>{ethernet2|llc|snap}<0xHHHH>vlan<1-4094>
ParameterDescription
ParameterDescription
<1-8>Templatenumber.
ethernet2Matchesethernet2typemessages.
llcMatchesllctypemessages.
snapMatchessnaptypemessages.
<0xHHHH>Messages’Ethernettypeeld.
<1-4094>VLANIDallocated.
Guidelines
Eighttemplatesaresupported.
4.5.8createvlanname
Purpose
ThiscommandcreatesaVLANname.
CommandMode
Globalcongurationmode
4-82
SJ-20130731155059-003|2013-11-27(R1.0)ZTEProprietaryandCondential