Zte ZXR10 2900E Series - Set Ethernet-Oam Remote-Loopback

Chapter4ServiceConguration
zte(cfg)#setethernet-oamremote-loopbacktimeout5
4.30.5setethernet-oamremote-loopback
Purpose
Thiscommandenablesordisablestheremoteloopbackfunctiononthespeciedports.
CommandMode
Globalcongurationmode
Syntax
setethernet-oamremote-loopbackport<portlist>{start|stop}
ParameterDescription
ParameterDescription
<portlist>Portlist.
startEnablestheremoteloopbackfunctiononthespeciedports.
stopDisablestheremoteloopbackfunctiononthespeciedports.
Guidelines
Thepreconditionforenablingtheremoteloopbackfunctiononthespeciedportsisthat
theOAMfunctionhasbeenenabledgloballyandenabledontheseportsandtheOAM
discoveryprocesshasbeenendedsuccessfully.Aftertheremoteloopbackfunctionis
enabled,thesystemisinfaultdiagnosisstatus.Localandremoteportscannotforward
datamessagesnormally.
Example
Thefollowingexampleenablestheremoteloopbackfunctiononport8:
zte(cfg)#setethernet-oamremote-loopbackport8start
zte(cfg)#
ThuJul105:06:482004ETH-OAMstartsremoteloopbacksuccessfullyonport8.
zte(cfg)#setethernet-oamremote-loopbackport8stop
zte(cfg)#
ThuJul105:06:582004ETH-OAMstopsremoteloopbacksuccessfullyonport8.
zte(cfg)#
4-489
SJ-20130731155059-003|2013-11-27(R1.0)ZTEProprietaryandCondential