Zte ZXR10 2900E Series - Set Poe Port Mode; Set Poe Port Power-Exceed

ZXR102900ESeriesCommandReference
4.3.11setpoeportmode
Purpose
ThecommandsetsthePoEmodetostatic,class,orlldp.
CommandMode
Globalcongurationmode
Syntax
setpoeport<portlist>mode{class|lldp|static}
ParameterDescription
ParameterDescription
<portlist>Portlist.Ifthisparameterisnotspecied,itmeansallports.
Example
ThefollowingexamplesetsthePoEmodeofport1/1tolldp:
zte(cfg)#setpoeport1/1modelldp
4.3.12setpoeportpower-exceed
Purpose
ThiscommandsetstheactiontakenwhenthepowerofaPoEportexceedsthelimit.
CommandMode
Globalcongurationmode
Syntax
setpoeport<portlist>power-exceed{shutdown|warning}
ParameterDescription
ParameterDescription
<portlist>Portlist.Ifthisparameterisnotspecied,itmeansallports.
Example
ThefollowingexamplesetstheactiontakenwhenthepowerofPoEport1/1exceedsthe
limittoshutdown:
zte(cfg)#setpoeport1/1power-exceedshutdowm
4-70
SJ-20130731155059-003|2013-11-27(R1.0)ZTEProprietaryandCondential