Zte ZXR10 2900E Series - Set Dhcp Port Server;Cascade;Client

Chapter4ServiceConguration
ParameterDescription
port<portlist>Portlist.
trunk<trunklist>
Trunklist.Onlythetrunkswiththeserverattributecanbeenabled
withthesnoopingfunction.
Guidelines
Tomakethesnoopingfunctioneffectiveonthespeciedports/trunks,globallyenablethe
snoopingfunctionandthenenablethesnoopingfunctiononthespeciedports/trunks.
Default
TheDHCPsnoopingfunctionisdisabledonports/trunks.
Example
ThefollowingexampleenablestheDHCPsnoopingfunctiononport10:
zte(cfg)#setdhcpsnoopingaddport10
%DHCPsnooping-and-option82isdisabled(0x40000cf0)
zte(cfg)#setdhcpsnooping-and-option82enable
zte(cfg)#setdhcpsnoopingaddport10
4.25.3setdhcpportserver/cascade/client
Purpose
ThiscommandsetsthepropertyofaportintheDHCPsnoopingfunction.
CommandMode
Globalcongurationmode
Syntax
setdhcpport<portlist>{server|cascade|client}
Parameters
ParameterDescription
<portlist>Portlist.
server
CongurestheporttoconnecttotheDHCPsever.Itisatrusted
port.
cascadeCongurestheporttobecascaded.Itisanuntrustedport.
client
CongurestheporttobedirectlyconnectedtotheDHCPclient.It
isanuntrustedport.
4-431
SJ-20130731155059-003|2013-11-27(R1.0)ZTEProprietaryandCondential