Zte ZXR10 2900E Series - L2 Pt Configuration; Set L2 Pt

ZXR102900ESeriesCommandReference
CommandMode
Globalcongurationmode
Syntax
setvlanpvlansession<1-4>{promise-port<portlist>|promise-trunk<trunklist>|isolate-p
ort<portlist>|isolate-trunk<trunklist>|communi-port<portlist>|communi-trunk<trunklis
t>}
ParameterDescription
ParameterDescription
<1-4>PLVANsessionnumber
<trunklist>Trunkportlist
<portlist>Physicalportlist
Guidelines
Thiscommandsetsonlyoneporttype.Porttypesareaccumulatedinonesession.
4.16L2ptConguration
4.16.1setl2pt
Purpose
ThiscommandsetsthemodeforforwardingIEEERESERVEMCmessages.
CommandMode
Globalcongurationmode
Syntax
setl2pt<protocol-list>{enable|disable|invalid}
Parameters
ParameterDescription
<protocol-list>IEEERESERVEMCprotocoladdressrange(0x00to0x2F).
enableEnableslayer-2transparenttransmissionofprotocolmessages.
disableDropsprotocolmessages.
invalid
Disablestransparenttransmissionandrecoversthedefault
conguration.Differentprotocolshavedifferentdefault
congurations.
4-354
SJ-20130731155059-003|2013-11-27(R1.0)ZTEProprietaryandCondential