Zte ZXR10 2900E Series - Set Group Add

ZXR102900ESeriesCommandReference
Guidelines
Anindependentswitchisnotcontrolledbyclusterandcannotbeaddedasamember
machine.
5.6.23setgroupadd
Purpose
Thiscommandaddsamembermachine.
CommandMode
Clustermanagementcongurationmode
Syntax
setgroupadd{mac<HH.HH.HH.HH.HH.HH>[<1-253>]|device<idlist>}
ParameterDescription
ParameterDescription
mac
AddsamembermachineinaccordancewiththeMACaddress
ofacandidate.
<HH.HH.HH.HH.HH.HH>MACaddressofacandidate.
<1-253>
SpeciestheIDofthemembermachinetobeadded.TheID
cannotbethesamewithanyoftheIDsofthecurrentmembers.
Withoutthisparameter,theprogramwillautomaticallyallocate
amembermachineID.
device
AddsamembermachineinaccordancewithadeviceID.Device
IDscanbequeriedbytheshowgroupcandidatecommand.
<idlist>Listofcandidates.
Guidelines
Amembermachinecanonlybeselectedfromthecandidates.
Example
Thefollowingexampleaddsamembermachine:
Cmdr.zte(cfg-group)#showgroupcandidate
IdMacAddressHopHostNamePlatform
--------------------------------------------------------------------
200.19.c6.32.f1.9c2zteZXR102918E
Cmdr.zte(cfg-group)#setgroupadddevice2
Addingdeviceid:2...succeededtoaddmember!
5-52
SJ-20130731155059-003|2013-11-27(R1.0)ZTEProprietaryandCondential