Zte ZXR10 2900E Series - Set Vlan Qinq Uplink Port; Set Vlan Egress-Tpid Session

ZXR102900ESeriesCommandReference
ParameterDescription
disableDeletescustomerports.
Example
Thefollowingexampleconguresports1,2,3,and4ascustomerports:
zte(cfg)#setvlanqinqcustomerport1-4enable
4.21.2setvlanqinquplinkport
Purpose
Thiscommandadds/deletestheuplinkportsofQinQ.
CommandMode
Globalcongurationmode
Syntax
setvlanqinquplinkport<portlist>{enable|disable}
ParameterDescription
ParameterDescription
<portlist>Portlist.
enableAddsuplinkports.
disableDeletesuplinkports.
Example
Thefollowingexampleconguresport24asanuplinkport:
zte(cfg)#setqinquplinkport24enable
4.21.3setvlanegress-tpidsession
Purpose
Thiscommandsetstheegress-tpidofatemplate.
CommandMode
Globalcongurationmode
CommandMode
setvlanegress-tpidsession<1-7>tpid-value<0xHHHH>
4-408
SJ-20130731155059-003|2013-11-27(R1.0)ZTEProprietaryandCondential