Zte ZXR10 2900E Series - Set Ipport Ipaddress; Set Ipport Mac

ZXR102900ESeriesCommandReference
Guidelines
Thelayer-3portsoftheZXR102900Eseriesareusedforswitchmanagement.Itsupports
applicationlayerprotocolssuchasWEB,SSH,andTELNET .Beforeenablingalayer-3
port,youmustconguretheIPaddress,VLAN,andMACaddress.TheMACaddressis
optional.ThesystemMACaddressisusedbydefault.
4.17.4setipportipaddress
Purpose
ThiscommandsetstheIPaddressandmaskforalayer-3port.
CommandMode
Layer-3congurationmode
Syntax
setipport<0-63>ipaddress{<A.B.C.D/M>|<A.B.C.D><A.B.C.D>}
Parameters
ParameterDescription
<0-63>Numberofalayer-3port
<A.B.C.D/M>IPaddress/mask
<A.B.C.D><A.B.C.D>IPaddressandmask
Guidelines
Tomodifytheipaddressparameter,disablethelayer-3portrst.
4.17.5setipportmac
Purpose
ThiscommandsetstheMACaddressforalayer-3port.
CommandMode
Layer-3congurationmode
Syntax
setipport<0-63>mac<HH.HH.HH.HH.HH.HH>
4-358
SJ-20130731155059-003|2013-11-27(R1.0)ZTEProprietaryandCondential