Zte ZXR10 2900E Series - Set Poe Power Maxvalue

ZXR102900ESeriesCommandReference
ParameterDescription
ParameterDescription
<portlist>Portlist.
enableEnablestheextend-detectionfunction.
disableDisablestheextend-detectionfunction.
Guidelines
Iftheextend-detectionfunctionisenabled,powersupplywillbeprovidedforportswhen
non-standardPDdevices(suchasCiscohigh-capacitydevices)aredetected.Ifthe
extend-detectionfunctionisdisabled,powersupplywillbeprovidedforportsonlywhen
standardPDdevicesaredetected.
Default
Theextend-detectionfunctionisdisabled.
Example
Thefollowingexampleenablestheextend-detectionfunctionforport3:
zte(cfg)#setpoeport1/3extend-detectionenable
4.3.6setpoepowermaxvalue
Purpose
Thiscommandsetsthemaximumoutputpowerandprotectionthresholdfortheswitch.
CommandMode
Globalcongurationmode
Syntax
setpoepowermaxvalue<1-500>[threshold<0-30>]
ParameterDescription
ParameterDescription
<1-500>
Maximumoutputpower.Differentswitcheshavedifferentranges.
Forexample,ifa2918E-PSswitchdoesnotsupportPOE,this
parametervalueis<1-0>.
<0-30>Protectionthreshold.
4-66
SJ-20130731155059-003|2013-11-27(R1.0)ZTEProprietaryandCondential