Zte ZXR10 2900E Series - Set Pppoe-Plus Mode Port; ZESR Configuration; Set Zesr Ctrl-Vlan Protect-Instance

ZXR102900ESeriesCommandReference
PPPoEVSTremoteIDonport2:port2
4.28.7setpppoe-plusmodeport
Purpose
Thiscommandsetsthemodeofhandlingdynamicuserinformationonaport.
CommandMode
Globalcongurationmode
Syntax
setpppoe-plusmodeport<portlist>{default|drop|modify}
ParameterDescription
ParameterDescription
<portlist>Portlist.
default
Defaultmode,inwhichthepppoe+taginformationinpacketswill
notbemodied.
drop
Dropmode,inwhichthepacketscarryingthepppoe+tag
informationwillbediscarded.
modify
Modifymode,inwhichthepppoe+taginformationinpacketswill
bereplacedbythelocalpppoe+taginformation.
Guidelines
WhenaPPPoEpacketcarryingthepppoe+taginformationisreceived,theportdirectly
forwardsthepackettotheserverifthemodeisdefault,ordiscardsthepacketifthemode
isdrop,orreplacesthepppoe+tagwiththelocalpppoe+tagandthenforwardsthepacket
totheserverifthemodeismodify.
4.29ZESRConguration
4.29.1setzesrctrl-vlanprotect-instance
Purpose
ThiscommandbindsacontrolVLANtoaSTPinstance.
CommandMode
Globalcongurationmode
4-476
SJ-20130731155059-003|2013-11-27(R1.0)ZTEProprietaryandCondential