Zte ZXR10 2900E Series - Set Qos Traffic-Limit Ge-Port Data-Rate

Chapter4ServiceConguration
Syntax
setqostraffic-limitfe-port<1-24>{packet-rate<0-148810>[packet-length<64-10240>]|di
sable}
ParameterDescription
ParameterDescription
<1-24>
NumberofanFEport.Differentdeviceshavedifferentport
numberranges.Inthesyntax,the2928Edeviceisusedasan
example.
<0-148810>Numberofpacketslimitedontheingressport.
<64-10240>Lengthofpacketslimitedontheingressport.
disableDisablestheportratelimitfunction.
Guidelines
Thiscommandsetstheingressratelimitfunctioninaccordancewiththisformula:ingress
ratelimit=numberofpackets*lengthofpackets.Thecongurationisvalidonlyiningress
ratelimitglobalbytemode.
Example
Thefollowingexamplesetstheingressratelimitto100ppsandpacketlengthto64bytes
forport2:
zte(cfg)#setqostraffic-limitfe-port2packet-rate100packet-length64
4.14.17setqostraffic-limitge-portdata-rate
Purpose
ThiscommandsetstheingressratelimitforaGEport.
CommandMode
Globalcongurationmode
Syntax
setqostraffic-limitge-port<25-28>{data-rate<0-1000000>|disable}
ParameterDescription
ParameterDescription
<25-28>
NumberofaGEport.Differentdeviceshavedifferentportnumber
ranges.Inthesyntax,the2928Edeviceisusedasanexample.
4-313
SJ-20130731155059-003|2013-11-27(R1.0)ZTEProprietaryandCondential