Zte ZXR10 2920 - Page 76

ZXR10 2920/2928/2952
(V1.0) Access Switch User Manual （Volume I）
62 Confidential and Proprietary Information of ZTE CORPORATION
[ZxR10 Boot]: zte
Load wbdEnd Begin
W90N740 MAC0: 10MB - Full Duplex
Board 2818s !
Marvell has been initialized !
boot device : wbdEnd
unit number : 0
processor number : 0
host name : tiger
file name : vxWorks
inet on ethernet (e) : 10. 40. 89. 106
host inet (h) : 10. 40. 89. 78
gateway inet (g) : 10. 40. 89. 78
flags (f) : 0x80
Attached TCP/IP interface to wbdEnd0.
Warning! no netmask specified.
Attaching network interface lo0
.
. .
done.
Attaching to TFFS. . .
test flash passed perfectly!
Welcome to boot manager!
Type for help
[BootManager]:?
ls */Display the current
directory list. /*
pwd */Display the current
absolution path. /*
devs */Display the FLASH
information. /*
show */Display the switch
type and mac address. /*
reboot */Restart the switch.
/*
format */Format the FLASH. /*
del file_name */Delete the specified
file. /*
md dir_name */Create a directory.
/*
mf file_name */Create a file. /*
cd absolue-pathname */Change the
current directory. /*
tftp ip_address file_name */Download/upload
a version file through TFTP /*
update file_name */Upgrade boot/*
rename file_name newname */Rename the file.
/*