Chapter 17 Firewall
VMG8924-B10D/B30D User’s Guide
197
Figure 105 Security > Firewall > General
The following table describes the labels in this screen.
17.3 The Protocol Screen
You can configure customized services and port numbers in the Protocol screen. For a comprehensive
list of port numbers and services, visit the IANA (Internet Assigned Number Authority) website. See
Appendix D on page 325 for some examples.
Click Security > Firewall > Protocol to display the following screen.
Figure 106 Security > Firewall > Protocol
The following table describes the labels in this screen.
Table 80 Security > Firewall > General
LABEL DESCRIPTION
Firewall Select Enable to activate the firewall feature on the VMG.
Low Select Low to allow LAN to WAN and WAN to LAN packet directions.
Medium Select Medium to allow LAN to WAN but deny WAN to LAN packet directions.
High Select High to deny LAN to WAN and WAN to LAN packet directions.
Apply Click Apply to save your changes.
Cancel Click Cancel to restore your previously saved settings.
Table 81 Security > Firewall > Protocol
LABEL DESCRIPTION
Add new
Protocol entry
Click this to add a new service.
Name This is the name of your customized service.
To Next Page
Loading...
