VMG8924-B10D/B30D User’s Guide
24
CHAPTER 2
The Web Configurator
2.1 Overview
The screens are based on VMG8924-B10D.
The web configurator is an HTML-based management interface that allows easy
VMG setup and
management via Internet browser. Use Internet Explorer 8.0 and later versions or Mozilla Firefox 3 and
later versions or Safari 2.0 and later versions. The recommended screen resolution is 1024 by 768 pixels.
In order to use the web configurator you need to allow:
• Web browser pop-up windows from your
VMG. Web pop-up blocking is enabled by default in
Windows XP SP (Service Pack) 2.
• JavaScript (enabled by default).
• Java permissions (enabled by default).
2.1.1 Accessing the Web Configurator
1 Make sure your VMG hardware is properly connected (refer to the Quick Start Guide).
2 Launch your web browser. If the VMG does not automatically re-direct you to the login screen, go to
http://192.168.1.1.
3 A password screen displays. To access the administrative web configurator and manage the VMG, type
the default username admin and password 1234 in the password screen and click Login. If advanced
account security is enabled (see Section 32.2 on page 266) the number of dots that appears when you
type the password changes randomly to prevent anyone watching the password field from knowing the
length of your password. If you have changed the password, enter your password and click Login.
Figure 8 Password Screen
To Next Page
Loading...
