Chapter 22 Voice
VMG8924-B10D/B30D User’s Guide
229
22.6 The Region Screen
Use this screen to maintain settings that depend on which region of the world the VMG is in. To access
this screen, click VoIP > Region.
Figure 132 VoIP > Region
Each field is described in the following table.
22.7 The Call Rule Screen
Use this screen to add, edit, or remove speed-dial numbers for outgoing calls. Speed dial provides
shortcuts for dialing frequently-used (VoIP) phone numbers. You also have to create speed-dial entries if
you want to call SIP numbers that contain letters. Once you have configured a speed dial rule, you can
use a shortcut (the speed dial number, #01 for example) on your phone's keypad to call the phone
number.
Immediate Dial
Enable
Select this if you want to use the pound key (#) to tell the VMG to make the phone call
immediately, instead of waiting the number of seconds you selected in the Dialing Interval
Selection field of the VoIP > SIP > SIP Service Provider > Add New Provider/Edit screen.
If you select this, dial the phone number, and then press the pound key. The VMG makes the
call immediately, instead of waiting. You can still wait, if you want.
OK
Click OK to save your changes.
Cancel Click Cancel to exit this screen without saving.
Table 104 VoIP > Phone > Phone Device > Edit
LABEL DESCRIPTION
Table 105 VoIP > Region
LABEL DESCRIPTION
Region Settings Select the place in which the VMG is located.
Call Service Mode Select the mode for supplementary phone services (call hold, call waiting, call transfer and
three-way conference calls) that your VoIP service provider supports.
Europe Type - use supplementary phone services in European mode
USA Type - use supplementary phone services American mode
You might have to subscribe to these services to use them. Contact your VoIP service
provider.
Apply
Click this to save your changes and to apply them to the VMG.
Cancel Click this to set every field in this screen to its last-saved value.
To Next Page
Loading...
Need help?
General
