ZyXEL Communications VMG8924-B10D - Add;Edit a Parental Control Profile

Chapter 19 Parental Control
VMG8924-B10D/B30D User’s Guide
205
19.2.1 Add/Edit a Parental Control Profile
Click Add new PCP in the Parental Control screen to add a new rule or click the Edit icon next to an
existing rule to edit it. Use this screen to configure a restricted access schedule and/or URL filtering
settings to block the users on your network from accessing certain web sites.
Figure 113 Parental Control Rule: Add/Edit Rule
The following table describes the fields in this screen.
Apply Click Apply to save your changes.
Cancel Click Cancel to restore your previously saved settings.
Table 87 Security > Parental Control (continued)
LABEL DESCRIPTION
Table 88 Parental Control Rule: Add/Edit
LABEL DESCRIPTION
General
Active Select Enable or Disable to activate or deactivate the parental control rule.
Parental Control
Profile Name
Enter a descriptive name for the rule.
Home Network
User
Select the LAN user that you want to apply this rule to from the drop-down list box. If you select
Custom, enter the LAN user’s MAC address. If you select All, the rule applies to all LAN users.